Jun 12

Wikipedia.Org has an excellent introductory article about Omega-3 fatty acids. Below are key excerpts from the article (reference link below):

N−3 fatty acids (popularly referred to as ω−3 fatty acids or omega-3 fatty acids) constitute a series of essential unsaturated fatty acids that have a final carbon–carbon double bond in the n−3 position, that is, the third bond from the methyl end of the fatty acid. Nutritionally important n−3 fatty acids include α-linolenic acid (ALA), eicosapentaenoic acid (EPA), and docosahexaenoic acid (DHA), all of which are polyunsaturated. The human body cannot synthesize n−3 fatty acids from scratch, but it has a limited ability to form the “long-chain” n−3 fatty acids EPA (20-carbon atoms) and DHA (22-carbon atoms) from the “short-chain” eighteen-carbon n−3 fatty acid ALA.

Essential fatty acids are molecules that cannot be synthesized by the human body but are vital for normal metabolism. One of the two families of these essential fatty acids is the omega-3 fatty acids. Because omega (ω) is the last letter in the Greek alphabet, the naming system counts from the last of the carbons to the carbon-carbon double bond. Likewise, the preferred n–3 nomenclature uses the letter “n” to mean the number of carbon atoms in the chain. If the fatty acid has this third-to-last double bond, it is called an ω–3 (“omega minus 3″) fatty acid. Common sources of n–3 fatty acids include fish oils and some plant oils such as flaxseed oil and algal oil.

Structure of Alpha-Linolenic Acid (ALA)

Chemical structure of alpha-linolenic acid (ALA), an essential n−3 fatty acid, (18:3Δ9c,12c,15c, which means a chain of 18 carbons with 3 double bonds on carbons numbered 9, 12, and 15). Although chemists count from the carbonyl carbon (Blue Numbering), physiologists count from the n (ω) carbon (red numbering). Note that, from the n end (diagram right), the first double bond appears as the third carbon-carbon bond (line segment), hence the name “n−3″. This is explained by the fact that the n end is almost never changed during physiologic transformations in the human body, as it is more energy-stable, and other carbohydrates compounds can be synthesized from the other carbonyl end, for example in glycerides, or from double bonds in the middle of the chain.

Structure of Eicosapentaenoic Acid (EPA)

Structure of Docosahexaenoic Acid (DHA)

 

List of n−3 fatty acids

Table lists several different names for the most common n−3 fatty acids found in nature.

Common name Lipid name Chemical name
Hexadecatrienoic acid (HTA) 16:3 (n−3) all-cis-7,10,13-hexadecatrienoic acid
α-Linolenic acid (ALA) 18:3 (n−3) all-cis-9,12,15-octadecatrienoic acid
Stearidonic acid (SDA), aka Moroctic acid   18:4 (n−3) all-cis-6,9,12,15-octadecatetraenoic acid
Eicosatrienoic acid (ETE) 20:3 (n−3) all-cis-11,14,17-eicosatrienoic acid
Eicosatetraenoic acid (ETA) 20:4 (n−3) all-cis-8,11,14,17-eicosatetraenoic acid
Eicosapentaenoic acid (EPA) 20:5 (n−3) all-cis-5,8,11,14,17-eicosapentaenoic acid
Heneicosapentaenoic acid (HPA) 21:5 (n−3) all-cis-6,9,12,15,18-heneicosapentaenoic acid
Docosapentaenoic acid (DPA),
Clupanodonic acid
22:5 (n−3) all-cis-7,10,13,16,19-docosapentaenoic acid
Docosahexaenoic acid (DHA) 22:6 (n−3) all-cis-4,7,10,13,16,19-docosahexaenoic acid
Tetracosapentaenoic acid 24:5 (n−3) all-cis-9,12,15,18,21-tetracosapentaenoic acid
Tetracosahexaenoic acid (Nisinic acid) 24:6 (n−3) all-cis-6,9,12,15,18,21-tetracosahexaenoic acid

  

Reference to original article: http://en.wikipedia.org/wiki/Omega-3_fatty_acid

Share
Jun 12

Some types of fish may contain high levels of mercury, PCBs (polychlorinated biphenyls), dioxins and other environmental contaminants. Levels of these substances are generally highest in older, larger predatory fish and marine mammals.

The most commonly eaten fish low in mercury are: canned light tuna, salmon, pollock, and catfish.

It is recommended to avoid eating shark, swordfish, king Mackerel, or tilefish (golden bass or golden snapper) because they contain high levels of mercury.

Eating oily fish like Salmon is a great way to increase Omega-3 polyusaturated fat intake.

 A picture of salmon with its Omega-3 rich skin

According to FDA, the benefits and risks of eating fish vary depending on a person’s stage of life:

  • Children and pregnant women are advised by the U.S. Food and Drug Administration (FDA) to avoid eating those fish with the potential for the highest level of mercury contamination (e.g., shark, swordfish, king mackerel or tilefish); to eat up to 12 ounces (two average meals) per week of a variety of fish that are lower in mercury (e.g., canned light tuna, salmon, pollock, catfish)
  • For middle-aged and older men and postmenopausal women, the benefits of eating fish far outweigh the potential risks when the amount of fish are eaten is within the recommendations established by the FDA and Environmental Protection Agency.

Omega-3 and Mercury Levels for Most Consumed Fish in the United States
(data published by American Heart Association, link below)

  Omega-3 fatty acids
(grams per 3-oz. serving)
Mean mercury level in parts per million (ppm)
Canned tuna (light) 0.17–0.24 0.12
Pollock 0.45 0.06
Salmon (fresh, frozen) 1.1–1.9 0.01
Cod 0.15–0.24 0.11
Catfish 0.22–0.3 0.05
Clams 0.25 ND
Flounder or sole    0.48 0.05
Crabs 0.27–0.40 0.06
Scallops 0.18–0.34 0.05

 

Fish with the Highest Levels of Mercury
(about 1 ppm; data published by American Heart Association, link below)

  Omega-3 fatty acids
(grams per 3-oz. serving)
Mean mercury level in parts per million (ppm)
Tilefish (golden bass or
golden snapper)
0.90 1.45
Shark 0.83 0.99
Swordfish 0.97 0.97
King mackerel 0.36 0.73

 

FDA Advice on Fish Consumption: http://www.fda.gov/Food/FoodSafety/Product-SpecificInformation/Seafood/FoodbornePathogensContaminants/Methylmercury/ucm115662.htm

American Heart Association article entitled “Fish 101” published Omega-3 and Mercury levels for different types of fish: http://www.heart.org/HEARTORG/GettingHealthy/NutritionCenter/Fish-101_UCM_305986_Article.jsp

Share
Mar 19

Below is excerpt on Risky Eating Behaviors from Dietary Guidelines for Americans, 2010 published on January 31, 2011. Reference: http://www.mypyramid.gov/guidelines/PolicyDoc.pdf

Harmful bacteria, viruses, and parasites do not always change the look or smell of food. This makes it impossible for consumers to know whether food is contaminated. Consumption of raw or undercooked animal food products increases the risk of contracting a foodborne illness.

Raw  or  undercooked foods commonly eaten in the United States include:

eggs (e.g., eggs with runny yolks),
ground beef (e.g., undercooked hamburger),
milk and milk products (e.g., cheese made from unpasteurized milk),
seafood (e.g., raw oysters).

Cooking foods to recommended safe minimum internal temperatures and consuming only pasteurized milk and milk products are the best ways to reduce the risk of foodborne ill-ness from animal products. Consumers who prepare foods that require eggs to remain raw (e.g., eggnog, hollandaise sauce, homemade ice cream) should use pasteurized eggs or egg products. Consumers who choose to eat raw seafood despite the risks should choose seafood that has been previously frozen, which will kill parasites but not harmful microbes.

Recommended Safe Minimum Internal Cooking Temperature for most meats, ground meats, poultry and egg dishes is in the range 160 – 165 degrees Fahrenheit (°F). Eggs should be cooked until yolk and white are firm. Recommended safe minimum internal temperature for fish is 145 °F.

Share
Mar 19


An example of daily food plan guidelines generated by MyPyramid.Gov is provided below. This plan is a 2400 calorie food pattern and based on average needs for a 34 year old male, 5 feet 9 inches tall, physically active less than 30 minutes a day, in the healthy weight range. Eating these amounts from each food group daily may help you gradually reach a healthier weight. (Personal calorie and nutrient needs may be more or less than the average, and it is recommended to consult a qualified nutritionist for a personalized plan.)

GRAINS                 8 ounces
VEGETABLES          3 cups
FRUITS                  2 cups
MILK                     3 cups
MEAT & BEANS      6.5 ounces


Make Half Your Grains Whole
Aim for at least 4 ounces of whole grains a day.

Vary Your Veggies
Aim for this much every week:
Dark Green Vegetables = 3 cups weekly
Orange Vegetables = 2 cups weekly
Dry Beans & Peas = 3 cups weekly
Starchy Vegetables = 6 cups weekly
Other Vegetables = 7 cups weekly

Oils & Discretionary Calories
Aim for 7 teaspoons of oils a day.
Limit your extras (solid fats & sugars) to 360 Calories per day.

Physical Activity
Physical activity is also important for health. About 60 minutes of moderate to vigorous activity most days can help you manage your body weight and prevent gradual gain. About 60 to 90 minutes daily can help you maintain weight loss. If you are inactive, work up to these amounts gradually.

Comments on MyPyramid.Gov Daily Food Plan guidelines
MyPyramid.Gov Food Plan recommends 3 cups of low-fat or non-fat milk every single day for an adult person! From my experience most adult americans do not consume 3 cups of milk on a daily basis. (While yogurts and yogurt smoothies are  an excellent source of calcium, most yogurt based products are “overloaded” with sugars.) Dear reader, how many cups of milk did you drink yesterday?

Reference: http://www.mypyramid.gov/mypyramid/index.aspx

Share
Sep 17
BP published its internal investigation report for Deepwater Horizon rig explosion at Macondo well in the Gulf of Mexico on April 20, 2010 (Links to Video, Presentation Slides, Executive Report and Full Report are below).

The investigation found eight major factors that contributed to Macondo well explosion and oil and gas leak. A sequence of failures involving a number of different parties, mainly BP, Transocean and Halliburton, led to the explosion and fire which killed 11 people and caused widespread pollution in the Gulf of Mexico.

BP’s managers and contractors involved with well exploration made mistakes that contributed to the tragedy. In its report BP blamed many of the errors on Transocean Ltd, the owner of Deepwater Horizon rig, and on service provider Halliburton Co.

Bloomberg.Com reports that: “BP’s report concealed the well’s “fatally flawed” design, which “set the stage” for the explosion, Vernier, Switzerland- based Transocean said Sept. 8. The driller, Transocean, cited a series of cost-savings decisions by BP that added risk. Cathy Mann, a spokeswoman for Houston-based Halliburton, said the report had “substantial omissions and inaccuracies” and that BP dictated design and testing procedures for the well.”

             

Watch BP video (29 mins)

   

Picture: Deepwater Horizon Rig Schematic Drawing

Share
Aug 23

BASF introduced epoxy resin and coating technology to reinforce wind turbine blades. Animation (link below) shows how rotor blades are manufactured with vacuum infusion process.

Animation: http://www.basf.com/group/corporate/en/news-and-media-relations/science-around-us/wind-energy/animation 

 

Share
Aug 23

BP is preparing to bring to the surface failed Blowout Preventer (BOP)
http://tinyurl.com/bp-lifting-bop

Share
Tagged with:
Aug 17

As of Tue, Aug 17, 2010 BP is on standby to get government approval to drill final 50 feet to intersect MC252 well annulus (space between rock formation and well casing) at about 800 feet above oil reservoir.

Below are quotes from BP’s briefing with Kent Wells on sealing Macondo well (Aug 10, 2010):

“We do know that we pumped about 200 barrels of cement or so out of the casing. Did it go into the reservoir? Did some go into the reservoir? Did some go up in the annulus? That’s an unknown.”

“We’re planning to intersect the well about 800 feet above the reservoir. And where we are right now with the relief well, we’re just at the shoe of the outer casing. And so we’re now going to start to go down to the place where we can intersect the annulus. And the annulus we’re describing is the annulus between the casing of the Macondo well and just the rock formation. It’s not an annulus between casing and casing. We’re going to intersect it at a point where it’s basically rock and then there’s an annulus and then there’s casing. And that’s where we plan to intersect.”

“And what we don’t know is exactly what we’ll find in that annulus. It could be mud. It could be oil. It could be cement. We just don’t know.”

Sources:
BP’s Briefing with Kent Wells on Aug 10, 2010:    http://bit.ly/c5Cysu  
BP’s Press Releases with Kent Wells:  http://bit.ly/cqaiRk

Share
Aug 10

Kent Wells of BP said on August 6 during the briefing that BP pumped just a little over 500 barrels of cement down the casing. He added “I think it was roughly about 200 barrels into the formation and the rest remained in the casing”. BP plans to remove failed Blowout Preventer after well is killed on August 15 – 20, and install a formal plug during regulatory abandonment procedure.

Source: http://www.bp.com/liveassets/bp_internet/globalbp/globalbp_uk_english/incident_response/STAGING/local_assets/downloads_pdfs/BP_technical_audio_08062010.pdf

Share
Jul 15

Starting from mid June, Congress made multiple requests to BP to explain condition of the leaking well and provide facts about possible oil leak into rock formation surrounding the wellbore (read letters here).

All along since the Macondo Well ruptured on April 20 in the Gulf of Mexico, BP was designing a well cap from “scratch” with two objectives in mind: 1) to contain all leaking oil and 2) to have possibility to shut-in the well. As we learned from Congress, Steven Chu, Admiral Thad Allen and independent sources BP knew about sea floor oil leaks they discovered during Top Kill operation, but was not forthcoming about oil sipping from sea floor.

It is not surprising after Top Kill procedure BP’s press briefings did not mentioned anything about designing an impermeable well cap. The first week of July BP installed mini Blowout Preventer, a cap with three RAM valves that serves dual purpose: to contain all leaking oil and to shut-in well if wellbore can hold oil reservoir pressure.

Admiral Thad Allen said it took so long to design this cap because BP had to manufacture and test this specially designed cap from scratch.

Kent Wells of BP mentioned in one of BP’s briefings that Macondo well will be considered intact, or unbroken, if wellbore can hold 8,000 – 9,000 psi pressure during well integrity test. If pressure is found significantly lower than 8,000 psi that would imply oil sips into surrounding rock formation. Oil leaking into rock formation poses a great risk of sea bed erosion and all measures are taken to avoid such outcome.

Congress Letters to BP, source link:
http://globalwarming.house.gov/files/LTTR/2010-06-13_BPWellIntegrityFollowup.pdf

Share
preload preload preload